This is a set of 4 CTS 'True Vintage Taper' custom long shaft 500k pots. They have been measured for their resistance (kΩ), matched to be within 3% of each other and labelled for neck volume, neck tone, bridge volume and bridge tone, respectively. 

The taper on the new custom CTS pots are based on pots from the 50s. They feature:

• Solid Brass thread and shaft
• Real Bakelite Baseplate
• Right earbelonging curve of 30% (like the old ones)
• Low turning torque
• Tolerance under 10% (Standard CTS up to 30%)

This is a set of 3 CTS 'True Vintage Taper' custom split shaft 250k pots. They have been measured for their resistance (kΩ), matched to be within 3% of each other and labelled for neck volume, neck tone, bridge volume and bridge tone, respectively. 

These pots feature a custom, shorter shaft length than standard CTS 250k split shaft pots to achieve a perfect fit in a pickguard with knobs on - see picture.

The taper on the new custom CTS pots are based on pots from the 50s. They feature:

• Solid Brass thread and shaft
• Real Bakelite Baseplate
• Right earbelonging curve of 30% (like the old ones)
• Low turning torque
• Tolerance under 10% (Standard CTS up to 30%)

This is a set of 2 CTS 'True Vintage Taper' custom solid shaft 250k pots. They have been measured for their resistance (kΩ), matched to be within 3% of each other and labelled for neck volume, neck tone, bridge volume and bridge tone, respectively. 

The taper on the new custom CTS pots are based on pots from the 50s. They feature:

• Solid Brass thread and shaft
• Real Bakelite Baseplate
• Right earbelonging curve of 30% (like the old ones)
• Low turning torque
• Tolerance under 10% (Standard CTS up to 30%)